Why Our HVAC and Refrigeration Budget Overshot Every Year — and It Wasn't the Equipment We Bought

The Audit That Made Me Stop Scrolling

In Q4 2023, I pulled a closer look at our facilities spending. We were 27% over on the HVAC and refrigeration budget versus where we planned to be. Not catastrophic. But it was enough that finance started asking questions about my next cycle.

My first instinct was the easy one: equipment got more expensive.

That was wrong. Or at least, incomplete.

When we merged six years of purchase records and work orders — over $180,000 in cumulative spending — the purchase prices were only about 22% of it. The other 78% lived in service contracts, repairs, downtime, and a category I didn't even have a name for until I saw it on paper: preventable maintenance. Roughly $40,000 of that money was wasted — not in the sense that it disappeared, but in the sense that we paid twice for the same thing.

This is what I want to walk through. The reason most small-to-mid facilities budgets overshoot is not the sticker price on a compressor or a chiller. It's everything else. And most of it never shows up on a purchase order until you go looking for it.

The Real Leaks Nobody Warns You About

Leak One: The Service Contract Is Your Second Purchase

We have a commercial chiller. Hitachi unit. Reliable, no complaints on the hardware itself.

But our first Hitachi chiller service contract was signed as part of the equipment package. The Year 1 number was $3,200. Looked reasonable. By Year 3 it was $5,100 — roughly 59% higher. When we went to renegotiate, we discovered the contract had no cap on annual increases. It also had a buried "labor adjustment" clause we'd never used.

We compared against a third-party service provider at that point. About $400 cheaper per visit. The catch: 72-hour response, not 24-hour.

The upside was roughly $1,600 a year in savings. The risk was our chiller sitting down for two days in the middle of summer. I kept asking myself: is $1,600 worth potentially losing cooling for the main office for a weekend?

Calculated the worst case: two days of downtime in July, temporary chiller rental around $4,000, plus expedited call-out. Best case: save $1,600. The expected value said go third-party. But the downside felt unrecoverable.

We stayed with the OEM-certified provider. Even after signing, I kept second-guessing. What if I was just paying for the name? The two weeks before the first scheduled service visit were stressful — I half expected them to find a problem the third-party would have flagged immediately.

This gets into refrigeration cycle design, which isn't my expertise. I can't tell you whether a third-party provider would have maintained that chiller equally well. What I can tell you from a procurement perspective: the increase clause in a service contract matters more than the first-year number. We learned that the hard way. Every contract I've signed since has a stated maximum annual adjustment, or I don't sign it.

Leak Two: Small Equipment Is a Leak, and It Leaks Everywhere

Here's what surprised me.

We have two small offices, each with a Hitachi 1-ton window AC. Not glamorous equipment. Nobody thinks about them. Around $30 a month in electricity each. Cheap enough to ignore, right?

No. We pulled three years of utility sub-metering on one of them and found the efficiency had dropped nearly 28%. The cause? Filters never cleaned, coils never washed. A $40 cleaning restored most of the loss.

Two units, three years, close to $1,100 in wasted electricity — that we know of.

I want to be clear: this isn't a knock on Hitachi. The machines did what they were rated to do. We just never maintained them. The failure was ours.

Worse was our ceiling fans. Three of them — one in the break room, two in the warehouse. Ceiling fans don't have a service contract, so they fell out of all our tracking entirely. Screws loosened, bearings dried out. One started rattling progressively worse over about six months before anyone acted on it.

(Should mention: ceiling fans don't need much — a yearly inspection is enough. The problem was that nothing was scheduled at all.)

And then there's the deep freezer in the break room, the one stocked with employee food and event supplies. It failed once. We lost about $900 in inventory. The cause turned out to be dust blocking the compressor coils. An $80 cleaning.

Leak Three: Downtime Doesn't Go on a Budget Line, So It's Invisible

Nobody assigns a budget line for downtime. So it disappears.

But the money still gets spent. Chiller down two days: $4,000 rental plus $600 in expedited service. Deep freezer failure: $900 in inventory plus $300 in expedited call-out. The rattling ceiling fan? Nobody counted it, but the annoyance of moving meetings to a quieter room had a cost too.

I eventually built a simple table: equipment, average downtime length, cost per downtime. It was humbling — not because the numbers were huge, but because the equipment that hurt most wasn't the most expensive. A $700 window AC serving the front office might as well be a $40,000 chiller when it goes down in August.

Leak Four: DIY Saved a Call-Out, but Cost Hours

This one we actually got right.

Our heating lead came in complaining about cold radiators. The maintenance company quoted $180 to come bleed a radiator. Our facilities tech at the time said: I can do that in half an hour.

And to be fair, he was right — about 40 minutes of work. But what he hadn't planned for was the sequence: knowing how to bleed a radiator without spraying water everywhere, understanding which radiators needed repeat bleeding, and figuring out the balancing valves. This gets into hydronic system engineering territory, which isn't my area.

(You should bleed them all, not just the cold ones. Took us a season to learn that.)

Internal cost? About $30 in technician time plus a bit of cleanup. That was one we won — because we had someone who knew what he was doing. If your team doesn't have that person, calling a service provider isn't wasteful. A colleague of mine tried to have his admin staff do it, and a snapped valve cost him $400 in repairs. The call-out fee would have been cheaper.

What the Numbers Added Up To

Six years, $180,000 in HVAC and refrigeration spend:

  • Equipment purchase: roughly $40,000 (22%)
  • Service contracts: roughly $52,000 (29%)
  • Call-out repairs: roughly $38,000 (21%)
  • Downtime and expedited fees: roughly $22,000 (12%)
  • Preventable maintenance (avoidable, in hindsight): roughly $28,000 (16%) — this includes the filter cleanings, belt replacements, and fan checks we should have done and didn't

I calculated that just getting the filter, fan, and radiator maintenance on a schedule would have saved nearly $12,000 of that — just by doing the small, unglamorous things on time.

What Actually Worked (Briefly)

I kept it simple.

One: a TCO sheet. Every quote broken into purchase price, three-year service cost, estimated downtime exposure, and expected increase rate. We made vendors watch us fill it in. Most of them tightened up their proposals once they saw the sheet.

Two: rank equipment by downtime impact, not purchase price. Chiller first, deep freezer second, window units third, ceiling fans last. Priorities became obvious.

Three: what we started calling the "small-stuff list." Filter changes, fan inspections, radiator bleeds — quarterly. Total annual cost around $600. It was the cheapest line item that fixed the $12,000 leak.

Four: price protection in contracts. A stated increase cap in every service agreement. Most vendors accept this. If they don't, that tells you something.

Who Shouldn't Copy This

I don't recommend hauling this whole process into a very small operation. If you have one chiller and one freezer and no dedicated facilities person, building a TCO sheet will feel like overkill. A simplified version works: track repair dates and costs per unit in a notebook. When a unit starts showing up too often, that's your trigger.

Also, if you're not the kind of person who wants to manage this — packing the whole thing into a full-service contract is a reasonable choice. Some providers do bundle pricing and downtime into a genuinely good deal. We just weren't in that category.

But if I had to pick one thing that's almost always worth doing: stop looking at purchase price first. The other 78% of the budget is where the pain lives. I'd figure that out before touching another equipment quote.

author-avatar
Elisa Nordberg
Elisa Nordberg writes about air-cooled and water-cooled industrial chillers, modular glycol systems, and screw, scroll, and centrifugal configurations for process and comfort cooling. Her evaluations reference ISO 5149 and AHRI 550/590 practices while comparing cooling capacity, COP, IPLV, compressor lift, fluid flow, and evaporator approach temperature. She helps plant engineers and sourcing teams size dependable chiller packages, interpret part-load performance, and balance energy use, redundancy, maintenance access, and lifecycle cost.

Leave a Reply

Your email address will not be published. Required fields are marked *